WEIZE 12V 35AH SLA Deep Cycle AGM Battery Replace 12 Volt 33AH 34AH 36AH 30AH, in Series 24V 36V 48V for Power Patrol SLA1156 Ritar RA12-33 Renogy PV Solar Panels Bat-Caddy X3R Golf Caddy

Sealed Battery&Safe Charging

• Manufactured with thick absorbent glass mat (AGM) separators and advanced valve-regulated technology, the battery is maintenance-free, leak-proof, and gas-free.
• Weize SLA batteries are utilized in a wide variety of applications including; Solar Panel Off-Grid Applications, Back-up Sump Pump, Kayak Trolling Motor, RV VAN Camping Trip, Travel Trailer, Golf Carts, Consumer Electronics, Electric Vehicles, Hunting, Fishfinder, Lawn and Garden Tools, Medical Mobility, Portable Tools, Toys and Hobby, Access Control Devices, Emergency Lighting, Security and more.

SLA batteries have a low self-discharge rate - about 40% per year or 3.3% per month. These batteries are able to be stored without charging for up to 5-6 months when at full capacity, but doing so is not recommended. At least every 2-3 months you should top charge them. In order to prolong their shelf life, SLA batteries should be stored and maintained properly.

Best Practices

• Store batteries in a cool, dry place (optimally 75 degrees Fahrenheit / 23 degrees Celsius or less)
• Periodical top charging of the batteries is recommended
• Store batteries in a fully charged state

Our batteries can be used in various types of:

• Access Control Systems
• Home Alarm Systems
• Burglar Alarm Systems
• Security Systems
• Electric scooters and bikes
• Electric wheelchairs
• Ride-on Toys
• Golf Carts

Connecting batteries

NOTE: The maximum number that can be connected in series is 4. In parallel, there are no limitations.

IN SERIES

By connecting the batteries in series you are doubling the voltage and maintaining the same capacity (amp hours). Connect the positive terminal of the first battery to the negative terminal of the second one. From the two free terminals connect the positive to the power lead on your device, and the negative to the ground connection of your application.

PARALLEL

By connecting the batteries in parallel you are doubling the capacity (amp hours) and maintaining the same voltage. Connect the positive terminal of the second battery to the positive terminal of the first battery. Do the same with the negative terminals. Connect your application to the positive and negative terminals of the first battery.

IMPORTANT INFORMATION BEFORE YOU BUY

In order to find the best replacement for your original battery you need to compare the physical dimensions, Volts, and Amp power of your original model to our battery. Besides physical dimensions, you also need to check battery terminals, which are the metal connectors on top of the battery. To determine what terminal your battery has, you will need to look at their form and determine if they have a flat connector, nut, bolt, or wires, and then measure their sizes.